Elevn Disc Kit 120mm Rotor - Chase ACT 1.2 and 1.0 20mm Axle

Note: Ships in 4-5 business days. Delivery time depends on the shipping method chosen at checkout.

The 20 mm axle version of Elevn's disc mount kit for Chase ACT carbon frames. If your rear hub runs a 20 mm axle rather than 10 mm, this is the one you need — the adapter and tensioner are machined to suit.

Everything is full CNC alloy: the 120 mm disc brake mount adaptor, and a matching chain tensioner that works on the opposite side to the disc. Pin bolt security stops the adapter rotating under braking load. Elevn include six disc screws and washers, two disc rotor spacers for hubs that need them, and two cover brake cleats that replace the standard brake mounts for a cleaner, more aerodynamic frame once you are no longer running rim brakes. Works with Center Lock hubs using a Center Lock adaptor.

Features:

• Designed to be fitted on Chase ACT 1.2 and 1.0 frames exclusively
• For 20 mm rear axle set up
• Full CNC alloy adaptor for 120 mm disc brake mount only
• Full CNC chain tensioner to work with the adaptor, on the opposite side to the disc
• 120 mm disc brake rotor fastening system, ISO 6 screws with air vents
• Pin bolt security
• 6 disc screws and washers
• 2 disc rotor spacers, needed depending on the type of rear disc-ready hub used
• 2 cover brake cleats replacing the standard brake mounts for a clean, aero design look
• Works on Center Lock hubs with a Center Lock adaptor
• Sold without hydraulic braking system